Differential pressure flow Deltatop DO65F

Overview

The Deltatop DO65F is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a meter run with standard orifice in compact or remote version and included accessories.

Differential pressure flow Deltatop DO65F Features

Measuring Principle Delta P
Product headline Calculated volume or mass flow measurement. dp primary element (orifice).
Orifice meter run with annular chamber corner taps.
Sensor features Internationally standardized.
Including pipe section.
Small pipe sizes DN10...50 ; 3/8...2".
Exchangeable orifice plate.
Compact or remote design.
Optimizable for minimized pressure loss, improved uncertainty or maximized Turndown.
Deltabar S/M differential pressure transmitter.
Nominal diameter range DN 10...50
3/8" ... 2"
Max. measured error typically 1,5% of calculated volume or mass.
DN 25 / 1" calibration recommended.
Uncertainty of primary element excluding uncertainty of density or compensation.
Measuring range 0.4 ... 550m3/h
Max. process pressure PN6 ... 160
Cl.150 ... 2500
Medium temperature range Compact version:
-200°C ... 200°C
-328°F ... 392°F

Remote version:
-200°C ... 1000°C
-328°F ... 1832°F
Degree of protection Transmitter (Deltabar):
IP67
NEMA6P
Display/Operation Transmitter (Deltabar):
4-line display
3 push buttons
Quick setup
HistoROM
Outputs Transmitter (Deltabar):
4 ... 20 mA
Digital communication Transmitter (Deltabar):
HART
PROFIBUS PA
FOUNDATION Fieldbus
Hazardous area approvals Transmitter (Deltabar):
ATEX
FM
CSA
IEC
TIIS
NEPSI
Differential pressure flow Deltatop DO65F