Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Ads
Sponsored Links
Fluid Indication and Control
» Straighteners / Conditioners
» Static Mixers
» Vaporizer Systems
» Sight Glass Indicators
» Flow Switch
» Indicator Panels
» Watercut meters
» Sensors
» Nozzles
» Paddle Wheel
» Crude Oil Mixing
» Leak Detection
» Air Eliminators
» Automatic Meter Reading
» Batching meter
» Flow Computer
» Flow Control
» Net Oil Computer
» Water Meters
» Wind Meters
» Test and Calibration Centers

COMBINATION AIR ELIMINATOR-STRAINER

COMBINATION AIR ELIMINATOR-STRAINER

This devise is an air release valve combined with a strainer in a single housing and is intended to eliminate air entrained in the liluid while preventing foreign solids from getting into the meter, which could present a serious problem.

By installing this device immediately upstream of the meter, of as close to the inlet as possible, accurate and precise flow measurements can be made.

GENERAL SPECIFICATIONS The fact is that the greater the capacity of air eliminator, the greater the air eliminating capability. It is important that the correct size and type are chosen.

Factors to be taken into consideration in the selection are 1. application , 2. type of liquid , 3. flow rate, viscosity, specific gravity , and 4. pressure:

  1. Application Elimination of small quantities of air introduced temporarily during transfer between storage tank, pumping to lorries, process control, etc
  2. Liquid to be applied.
    - Low viscosity products-gasoline, JP4, Kerosene, water,alcohol,etc
    - High viscosity products-crude oil,light oil heavy oil, caustic soda, etc
  3. Max operation pressure : 0.97 MPa
  4. Test Pressure : 1.46 MPa
  5. MAX. operating temperature
  6. Flange rating : JIS 10K FF (STD), JIS 10K RF
Manufactured by
COMBINATION AIR ELIMINATOR-STRAINER
Company: OVAL CO., LTD.
Products:

Flowmeters, Peripherals and Related Instruments,Electronic Instruments Flowmeter calibration Systems,

Website: http://www.kfs.co.kr/oval/gcc006_e.pdf
Tel: 81-3-3360-5121
Country Japan
Company Info:

The industrial society we live in is having continuous innovative changes which never seen before. In this environment, with more than half century of the career in the business and fully utilizing the management resources and social trust cultivated through the years as “Manufacturer of Flowmeters, Related Instruments and System Products”, we determine to be a company which satisfies the customer needs with own products and pride which pursues the ideal. At the same time, this society requires each company to make ecological and social contributions on global scale, and that implies coming of age the role of flow measurement and control technology become more important. Realizing the needs of the time, OVAL, having ISO9001 and ISO14001 certificates, and as a Japan Calibration Service System (JCSS) registered company, will make much efforts to help end-users create values.

Types of Flowmeters
» Ultrasonic
» Thermal Mass
» Mass Flow Controller (MFC)
» Coriolis Mass
» Rotameter
» Positive Displacement PD Meter
» Vortex shedding
» Multiparameter Mass Vortex
» Multiphase
» Turbine
» Gas Flowmeter
» Air Flowmeter / Anemometer
» Compressed air Flow
» Calorimetric
» Compound Meter
» Electromagnetic
» Flumes & Weirs
» Insertion Flow Meter
» Open Channel
» Orifice plate
» Paddle Meter
» Variable Area
» Venturi
» Doppler
» Transit-Time
» Portable Flow meter
» Low Flow Measurement
» Laminar Mass
» Medical
» OEM
» dP cell/transmitter