Accurate insertion flow meter metering even
at very low flow rates
Linearized analog output for inter-facing
with recorders, ratemeters, PLC's
Easy insertion flow meter depth adjustment
for pipes from 1.5" to 24" diameter
Solid State design. No maintenance for the
insertion meter as there are no moving parts
to stick or wear out
Ideal for handling aggressive and hard to
measure media
Compact, rugged industrial design
Minimal inventory requirements one smart
insertion flow meter fits all pipe sizes up
to 24"
Featured
Products
Flow
Netwok Smart meter
Suitable for pipes up to 24”
Measuring range from 0.2 m/s up to 3.5 m/s
A flow meter for everything that flows
Made for the 1/7th law
Principle of operation
The flow network smart meter's operation is based on
an advanced calorimetric technology.
The sensor head of the flow network contains two PT-resistors.
One of them is measuring the temperature of the media,
while the other is heated by an attached heating resistor,
resulting in a temperature difference between the two
PT-resistors.
The temperature difference between the two PT-resistors
is predetermined and a control circuit keeps this temperature
difference constant.
The flow of the media cools the heated PT-resistor
proportional to the speed of the flow. The heating power
fed into the system by the control circuit, in order
to keep the temperature difference between the two PT-resistors
constant, is the equivalent to the heat dissipation
by the flow of the media. This results in a linear output
signal proportional to the flow speed.
world's most advanced insertion flow measurement technology
available. Digital signal processing provides a measuring
system with unsurpassed accuracy, versatility and cost
of ownership. The system installs quickly into liquid
piping systems and can be configured and operational
within minutes. The exclusive insertion tip ensures
accurate and stable flow readings, even when poor system
hydraulics, flow swirl or very low flow rates are encountered.
The insert mag meter is designed for
permanent installation in full-pipe liquid systems.
The hot-tapped probe can be installed and retracted
from service without interrupting the process stream.
Other features include: bi-directional flow measurement,
continuous intelligent diagnostics, two-line backlit
alphanumeric display, tactile keypad, optically isolated
input/output busses and field replaceable input/output
communication modules.
These meters are direct replacements for insert Mag Probea,
insert mag meters or insert Venturi-notched tips. Reading
accuracy and reliability, especially at low flow rates,
are improved versus mechanical, DP and vortex shedding
flow meter performance. The insertion probe can be installed
and removed from service without turning off pumps or
draining piping - eliminating down time. User configurable
rate and totalizer units include: Feet, Gallons, FT3,
Mil-GAL, Barrels, Acre-Feet, Pounds, Meters, Liters, M3,
Mil-Liters and Kilograms.
