 |
Ads |
|
| |
|
Sponsored Links |
|
| |
|
Flow Indication & Control |
|
|
|
Ultrasonic
Medical Gas Flow Meter |
 |
- High reliability, robust performance
- Bi-directional measured
- Requires no calibration by the user
Gill Instruments Ltd, the world leader in the design
and production of ultrasonic meteorological anemometers,
has now successfully applied the same technology to
the demanding medical ofanaesthesia and ventilation
monitoring.The Spirocell uses proven ultrasonic techniques
to measure gas reliably and accurately with no moving
parts. Compared with existing technology the Spirocell
provides extended functionality, reduced lifetime costs
and improved reliability. |
It can measure from extremely
low rates up to its maximum with no change in its Together
with its high sample rate this gives the speed of response
and accuracy to produce detailed information on very
small changes in the gas w. Unlike other measurement
devices the Spirocell retains its accuracy despite the
presence of moisture and the rapid changes in temperature
and humidity that are found in patient respiration.
This robustness of operation also means that the user
is not required to perform any calibration on the unit.
Along with these benefit the Spirocell is also easy
to use.
|
|
|
SPECIFICATION
Flow accuracy ± 3%(1) (2)
Resolution 0.01 l/min
Flow rate ±0.2 to 150 l/min(3)
Sample rate 100Hz
Resistance to flow <2cmH2O @ 60
l/min(1)
Operating media Air and all common
anaesthetic gas mixtures(4)
Power 12V, 80 mA peak
Outputs RS232 or Pulse frequency proportional
to rate
- Measured in air
- Worst case accuracy is +/- 10% for the whole range
of gases
- Standard anaesthesia flow housing. Higher flow
rates possible with different housings
- Excluding heliox
|
Manufactured by
 |
| Company: |
GILL TECHNOLOGY LIMITED |
| Products: |
Position Sensor ,Level Sensor
,Speed Sensor, Flow Sensor |
| Website: |
http://www.gillsensors.co.uk/content/datasheets/spirocell.pdf |
| Tel: |
+44(0)1590 613400 |
| Country |
United Kingdom |
|
|
 |
|
|
Company Info:
Gill Sensors is a business unit of the highly successful
Gill Research and Development Ltd. Continuing the company
tradition of supplying innovation and value to our customers,
Gill Sensors have employed patented induction technology and
the novel use of capacitive theory to provide a range of standard
and customised non-contact position, level and bulk sensor
solutions.
What sets Gill apart is its focus and attention to customer
satisfaction. It recognises that its customers will be faced
with particular challenges that cannot be serviced by traditional
methods and/or will be looking for alternative approaches
and techniques.
Gill provide a total one-stop electronic, software and product
customisation service from initial concept right through to
volume production. The provision of rapid prototypes is of
particular benefit to customers with aggressive project timeframes
where the evaluation of sample sensors gains valuable advantages
in terms of time and mitigation of risk. |
|
|
Types of Flowmeters |
|
|
|
|
|
