DKB flow indicator is ideal for use in either air or fluid flow applications. The absence of wear components assures high reliability in installations unsuitable for indicators using bearings with a rotating wheel or turbine. The DKB is easily seen from elevated positions. Our domed sight glass allows full 360° visibility from above. The bright float is easily seen from even large distances.

Special Features:

• Water: 0.03 - 1.8 GPM ... 0.08 - 16 GPM
• Air: 0.11 - 14 SCFM ... 0.32 - 88 SCFM
• Max. pressure: 85 PSIG
• Max. temperature: 250 °F
• Connection: 1/8" – 1” NPT Brass
• Horizontal Mounting only
  More>>

SERIES SFB and SFP meets the needs of simple flow applications. Either the Rising Ball or Paddle Style will satisfy most application needs when calibrated flow indicators are not required. Constructed from high quality materials these in-line indicators are suitable for many applications including water, oil, chemicals, air and gases.

Special Features:

• Clear Flow Indication – Full View of Process
• Operates Over a Wide Flow Range
• No Routine Maintenance Required
• 230 PSI/400 Degrees F Capability
• Applications of Liquids , Air, & Gases
• Low Pressure Loss
• Materials: Bronze, Stainless Steel, Teflon, PPS
  More>>

The DKF flow indicator is best suited to fluid flow applications requiring flow indication which can be easily seen from an elevated position. Our domed sight glass allows full 360° visibility from above. The bright paddle wheel is easily seen from even appreciable distances.

Special Features:

• Indicating range: 0.03 - 1.8 GPM....0.08 - 16 GPM (water)
• Fitting: 1/8...1 NPT
• Material: brass, Rotor: Delrin or PTFE
• Max. pressure: 85 PSIG
• Max. temperature: 250°F
  More>>

With a simple twist of the sight glass, integral wipers clean the viewing area to allow unobstructed observation of the rotor. The offending contaminant’s are then simply washed away by the medium flow. This process may be repeated as often as desired-no fuss-no downtime. The DAA is available with brass or stainless steel fittings with female threads 1/4” to 1-1/2” NPT. The body is made of a hard glass (Duran) and the rotor and wipers are synthetic. the device is kept tight and rotatable through the use of low friction o-rings. Try the new DAA, it can be habit forming

DAA visual flow indicator features a self-cleaning mechanism to insure full visibility of the rotor at all times. Most types of known flow indicators suffer problems of indicator visibility with use. These problems are the result of dirt build-up on the viewing windows of these devices. For such a device to be cleaned, it must be removed and restored at some convenient time (such as during plant shut-down). Unfortunately, dirt build-up usually does not schedule itself to correspond to planned shut-downs.

Special Features:

• Transparent Glass Cylinder For Liquids
• Maximum Pressure: 230 PSIG
• Self-cleaning Mechanism for the Glass Cylinder
• Universal Mounting
  More>>